Ceramics machine walking ram
Weight: 4~18T
Applicable devices: Brick machine, Ceramic machine etc.
Application: building material industry etc.
Customizable or not: Yes
Product introduction
Bearing the output force from hydraulic cylinder plunger and the counter-force from anvil compression work piece while running, the walking beam is the key stressed member for forging press and ceramics machine. Meanwhile, its rigidity will directly affect the forming precision of forging press. Therefore, how to make the rigidity of walking beam reach designed requirement is the key technology for the design of large-scale forging presses.
Our main material for the Ceramics machine walking ram is similar to followings:
Advantage
The technical staffs at Shanghai Special Metal Co., Ltd develop the topology optimization analysis into the production of walking beam to ultimately obtain the best design.
Shanghai Special Metal Co., Ltd possesses advanced fault detector, universal strength testing machine and other high-tech inspection equipments to guarantee the high quality walking beam.
Production Process
1. Wooden pattern Production
2. Molding
3. Pouring
4. First cleaning
5. Heat treatment - grinding (inspection)
6. Rough machining (inspection)-finishing machining (inspection)
7. Packing-delivering
Quality assurance
The fabrication route is governed by the provisions of the implemented Quality System ISO 9001: 2000. The standard documentation ensures the full traceability of every process step:
Manufacturer test certificates according to DIN EN 10.204 § 3.1 including chemical composition, mechanical properties and non-destructive examination;
Dimensional check supported with a "as-built" sketch
Weight: 4~18T
Applicable devices: Brick machine, Ceramic machine etc.
Application: building material industry etc.
Customizable or not: Yes
Product introduction
Bearing the output force from hydraulic cylinder plunger and the counter-force from anvil compression work piece while running, the walking beam is the key stressed member for forging press and ceramics machine. Meanwhile, its rigidity will directly affect the forming precision of forging press. Therefore, how to make the rigidity of walking beam reach designed requirement is the key technology for the design of large-scale forging presses.
Our main material for the Ceramics machine walking ram is similar to followings:
Standard Specifications for Cast Steel | ||
Country | Standard | Grade |
United Kingdom | BS 3100 | A2 |
USA | AISI /SAE | UNS:J04000 |
Germany | DIN 1681 | GS-60 |
Japan | JIS G5101 | SC480 |
International | ISO 3755 | 270-480 |
The technical staffs at Shanghai Special Metal Co., Ltd develop the topology optimization analysis into the production of walking beam to ultimately obtain the best design.
Shanghai Special Metal Co., Ltd possesses advanced fault detector, universal strength testing machine and other high-tech inspection equipments to guarantee the high quality walking beam.
Production Process
1. Wooden pattern Production
2. Molding
3. Pouring
4. First cleaning
5. Heat treatment - grinding (inspection)
6. Rough machining (inspection)-finishing machining (inspection)
7. Packing-delivering
Quality assurance
The fabrication route is governed by the provisions of the implemented Quality System ISO 9001: 2000. The standard documentation ensures the full traceability of every process step:
Manufacturer test certificates according to DIN EN 10.204 § 3.1 including chemical composition, mechanical properties and non-destructive examination;
Dimensional check supported with a "as-built" sketch